Banner

Product image

EU07501 - Algae Elixir

A light and fluid elixir that leaves a soft and matte finish on the skin.


A light violet liquid that provides a matte and powdery touch!

PRODUCT DESCRIPTION

An ultra-fluid, light, and hydrating liquid!

PRODUCT BENEFITS

  • Elixir face care
  • Hydration bath

Key Ingredients

HYDRALIXIR™ CC an ecodesigned cellular water from a couple of red seaweed to give a touch of naturality and sustainability to the formula.
SENSANOV™ WR completes the sensory profile of this care by decreasing the glycol's sticky touch and brining a matte and powdery touch.
SEPIMAX™ ZEN stabilizes the high percentage of glycols brining an "oil-like" emollient texture.
EMOGREEN™ L15 a plant-based and biodegradable alternative to silicon oils to bring gliding and a powdery afterfeel.
AQUAXYL™ restructures the cutaneous barrier and brings an immediate and long-term moisturization.

Formula

Phase Ingredient %
A Aqua / Water Up to 100%
HYDRALIXIR™ CC 10.00%
SENSANOV™ WR 0.50%
Triethanolamine (50%) 0.14%
B Butylene glycol 10.00%
Propylene glycol 10.00%
SEPIMAX™ ZEN 0.50%
EMOGREEN™ L15 3.00%
C AQUAXYL™ 3.00%
Colorant 0.30%
Alcohol 3.00%
D Phenoxyethanol - Methylparaben - Ethylparaben - Ethylhexylglycerin 0.60%
Parfum / Fragrance 0.05%

FORMULATION ADVICES:

Laboratory scale - 5 kg - Pilot

Add phase B in the tank and start stirring. In parallel, heat the water at 85°C, then add HYDRALIXIRTM CC. Start stirring, when the two waters are at 85°C, add SENSANOVTM WR and TEA 50%. Transfer phase A into phase B under vacuum at 85°C. After the introduction, break vacuum, and emulsify the blend during 5 minutes at 85°C. Cool down at 60°C, then at 30°C, and add phases C and D under agitation. Cool down at 20°C, check the pH.

Characteristics

Aspect: WHITE FLUID EMULSION
Packaging: Dropper
pH: 5.5
VISCOSITIES: 1M at RT: 1,680 mPa.s Brookfield LV4-6 Recovery at RT (after 1M at 45°C): 1,600 mPa.s Brookfield LV4-6. STABILITY: 1M at RT & 45°C