EU07588 - Hd Cushion
EU07588 - Hd Cushion
Good coverage & Low transfer!
HD cushion shows remarkable performances of coverage** (89%), with a very low transfer**!
Formulated without silicones, the formula gives a pleasant & light skin feel thanks to an optimized combination of EMOGREEN™ L15 (C15-19 Alkane) (Natural & Renewable) & EMOSMART™ V21 (C18-21 Alkane)! Non polar & biodegradable, they are REAL alternatives to volatile silicone oils.
SEPIFINE™ BB absorbs oil excess & leaves a matte effect on the skin. (Amylopectin) A natural texturizing powder, ethically sourced, coming from Babassu nut exclusively sourced in Brazil. This biodegradable powder provides a soft & velvety skin finish while creating a pleasant playtime.
EASYNOV™ efficiently stabilizes this W/O emulsion containing almost 9% of pigments & sun filters. (Octyldodecanol - Octyldodecyl Xyloside - PEG-30 Dipolyhydroxystearate)
A liquid lipophilic emulsifier. It allows you to develop Water-in-Oil emulsions without wax. Gives soft & silky texture without sticky or tacky effect.
The formula also provides the consumers most expected skin care benefits: AQUAXYL™ deeply moisturizes the skin & a blend of sun filters for UV protection. (Xylitylglucoside - Anhydroxylitol - Xylitol).
For additional anti-aging benefits, TIMECODE™ can be added in phase D (formula stability tested) (Palmitoyl Glycine).
The formula soft skin feel & light touch is reinforced by DUB ININ* (Isononyl Isononanoate) & LANOL P (Glycol Palmitate).
Laboratory scale - Defloculator
Heat phase A and B up to 80° C under defloculator separately. Once the waxes are melted, mix with rotor-stator for 2 min at 2500 rpm. Still at 80° C, add phase C in B and shake for 2 minutes at 2500 rpm. Add phases (B + C) in phase A slowly under defloculator, stir with the rotor-stator for 1 min at 2500 rpm, then 1 min at 3000 rpm. Mix with defloculator at 800 rpm for 30 min. Cool down while mixing at 250 rpm. Add phases D to F one after the other, still stirring.
Aspect: Brown Liquid
VISCOSITIES: 1M at RT: 38,850 mPa.s Brookfield LV4-6.
STABILITY: 3M at RT, 4°C & 45°C/ Stable 2M at 50°C/
Acceptable slight change in appearance after 1 month at 42°C.
*Stearinerie Dubois' products distributed by SEPPIC Inc in the US For other locations, contact Stearinerie Dubois: https://www.stearinerie-dubois.com/en/contact/