Banner

Product image

EU07763 - Spray Everyday

Sprayable moisturising emulsion!


A fluid emulsion with a watery feel!

PRODUCT DESCRIPTION

Rehydrate your skin all day long with this light mist!

PRODUCT BENEFITS

  • Easy & practical gestures
  • Dry skin
  • Face & Body

Key Ingredients

FLUIDIFEEL™ EASY creates a fluid, sprayable and light emulsion! (Lauryl Glucoside and Myristyl Glucoside and Polyglyceryl-6 Laurate) Glycolipidic O/W sustainable emulsifier, from 100% vegetable origin and MB certified. Processable at room temperature for time and energy savings. Sprayable and able to efficiently stabilize low and very low viscosity formulations. It gives light textures.

EMOGREEN™ L19 gives a fresh & slippery feel with a soft finish! (C15-19 Alkane (Plant-based & Renewable)) It is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel.

SOLAGUM™ AX provides a soft, non-sticky feel and a moisturising sensation to this mist. (Acacia Senegal Gum - Xanthan Gum) Stabilising and texturising polymer of natural origin with excellent resistance to electrolytes.

AQUAXYL™ & HYDRACHRYSUM™ provide immediate and long-term deep hydration!

AQUAXYL™ (Xylitylglucoside - Anhydroxylitol - Xylitol) A combination of natural moisture-boosting plant sugars that hydrate and restructure the skin by harmonising the skin's moisture flow.

HYDRACHRYSUM™ (Aqua/Water - Glycerin - Helichrysum stoechas Callus Culture Lysate) It fights effectively and durably against skin dryness. It increases the number of lacunar zones, markers of hydration acting as extracellular water reservoirs and breaks the vicious circle of Inflamm'dryness.

FORMULATION ADVICES:

Laboratory scale - Laboratory scale - 2 kg

In a beaker, weigh phase A. Mix with a spatula. In another beaker, weigh phase B. Mix with a spatula. Pour phase A in one go into phase B. Emulsify 6 min at 4000 rpm under Silverson. Cool for 10 min under Rayneri with an anchor at 300 rpm. Adjust the pH to 5.5 with phase C.

Characteristics

Aspect: White fluid cream

Packaging: Spray

pH: 5.5

VISCOSITIES: 1M at RT: 4,600 cps Brookfield S3S6

Recovery at RT (after 1M at 45°C): 5,830 cps; Brookfield S3S6

STABILITY: 3M at RT, 45°C, 4°C and cycles -5°C/+40°C.

Want to receive Seppic’s "EU07763 - Spray Everyday" prototype? Request one in the chat!